Our Sherman-based crews carry the parts and the know-how to get your air moving again today. Emergency dispatch available across Sherman and the surrounding zip codes.
Call +1-866-805-8548 and describe what your system is doing — the symptoms help us send a tech prepared with the right parts.
You'll get a flat-rate quote before any repair work begins — no guessing what the final bill will look like.
Warranty details are explained clearly so you know exactly what's covered going forward.
Leonard HVAC grew one honest service call at a time in communities like Sherman. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Sherman, TX.
You won't find us buried under layers of call-center scripts — we're the company that tells you what actually needs fixing instead of what pads the ticket. We carry the credentials Sherman inspectors and property managers expect to see, and we keep that documentation available on request for every job, residential or commercial.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes the maintenance schedules we recommend — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Trust in this industry gets eroded fast, and it takes real consistency to earn it back. That's the gap we built Leonard HVAC to close. We'd rather lose a job to a lower bid than win one by cutting corners on the diagnosis, because a customer who trusts us once tends to call us again — and Sherman is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Sherman rooftop unit. Our warranty and service history records stay attached to your address, so any future technician who visits already has the full picture.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Sherman dispatch team moves emergency tickets to the front of the schedule so a technician is diagnosing your system as fast as physically possible.
Once a technician is on-site, the goal is always a same-visit repair — most emergency calls in Sherman get resolved in a single trip, not a multi-day back-and-forth.
If your unit is past its expected service life, running loud, or spiking your utility bill, a replacement conversation is worth having. We walk Sherman homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
We protect floors and entryways during the install and haul away the old equipment so you're not left dealing with disposal.
Downtime in a commercial space costs money every hour a system is offline. Our commercial division services light industrial and warehouse ventilation across Sherman, with after-hours work to avoid disrupting business.
Property managers working with multiple Sherman locations can set up a standing account so every site gets consistent service history and pricing.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle humidifier, dehumidifier, and air purifier installation for Sherman households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
This is the standard every Sherman technician on our team is held to.
Details vary by job type and are always shared upfront, never buried in fine print.
Emergency dispatch never comes with a hidden surcharge sprung on you after the fact.
Our office follows up after major repairs and installs to confirm everything is holding.
Most breakdowns don't happen without warning — they announce themselves for weeks before the system actually quits.
Ignoring new noises is one of the fastest ways to turn a small repair into a major one.
This is one of the most common complaints we hear on service calls across Sherman.
A system working harder than it should to hit the same temperature shows up directly on your utility bill.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
Chemical odors may signal a refrigerant leak, which requires a licensed technician to handle safely.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
We explain diagnostic fees and repair estimates before authorizing work.
Because our trucks are stationed near Sherman, we're rarely far from your address.
Parts and labor are backed by warranty terms explained in plain language.
Every technician carries current state licensing and manufacturer training.
We explain what failed, why it failed, and what the options are.
Replacement systems don't have to be paid in one lump sum.
A snapshot of the feedback that keeps us accountable.
"Our AC quit on the hottest weekend of the year and they had a tech out within a couple of hours. No pressure to buy a whole new system when a repair was all we needed."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. Techs are always polite, always on time, and clean up after themselves."
"They handled the whole install in a single day, exactly like they said they would. New system is noticeably quieter and our energy bill actually dropped."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Documentation for our records was thorough and easy to file."
"The estimate matched the final invoice exactly, down to the dollar. Installation crew was in and out in a day and left the space cleaner than they found it."
"Called at 11pm during a heat wave and honestly didn't expect anyone to pick up, let alone show up. Genuinely relieved to have found a crew that answers when it matters."
After thousands of service calls across Sherman, a handful of causes show up again and again.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Keeping vents unblocked by furniture and rugs helps maintain even airflow throughout the home. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Sherman area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Every tech on our Sherman roster goes through background checks, licensing verification, and ongoing manufacturer training.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Runs point on overnight and weekend emergency calls throughout Sherman.
Focuses on commercial rooftop units, multi-zone systems, and facility maintenance contracts.
Standard appointments are usually scheduled within 24-48 hours, while true emergencies jump the queue.
Yes — every job gets a clear quote before any repair work begins, so there are no surprise line items on the invoice.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
We maintain current credentials because it protects both our customers and our team.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
We cover Sherman and the surrounding communities, including the zip codes listed in our coverage section below.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
Yes, we service systems regardless of who originally installed them.
Ask about financing during your in-home estimate to see what fits your situation.
Most Sherman homes benefit from two tune-ups a year — one before cooling season and one before heating season.
Check that the thermostat has power and the batteries aren't dead, and check your breaker panel for a tripped switch before calling.
Ask about current after-hours rates when you call +1-866-805-8548.
Most standard repairs are completed in under two hours once the technician has diagnosed the issue and you've approved the quote.
For most residential visits, yes, an adult should be present to grant access and approve any quoted work.
Our technicians are familiar with both, which means less time spent figuring out your specific setup and more time actually fixing the problem.
If you manage several units or a shared system across a Sherman property, ask about setting up a standing service account so every request gets handled under one consistent agreement.
We accept standard payment methods for repairs and smaller jobs, and we'll always tell you upfront what a given service is likely to cost so there's no last-minute scramble to figure out payment. If a rebate or local incentive program applies to your Sherman installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
We dispatch throughout Sherman and the neighboring communities, keeping response times tight because our trucks stay close to home.
Property managers with multiple Sherman addresses can consolidate everything under one account for simpler scheduling and consistent pricing across every location.
